Gas Fireplace Stoves > HearthStone> Santa Fe
HearthStone Santa Fe Gas Stove
Versatile Gas Stove
Available as a Direct-Vent, or Vent Free gas-fired stove, the Santa Fe is just right for heating large areas of your home. It can be vented either through your roof or an exterior wall, or not at all, and its slim profile allows the stove to fit into most spaces. As with all HearthStone gas-fired stoves, the Santa Fe’s variable flame height adjuster allows you to adjust the intensity of the fire. Turn it up for higher heat output, or down for ambiance and fire watching. Its large display window is ideal for viewing the gently flickering flames.
| Direct Vent | Vent Free | |
| Heating Capacity | 1,800 sq. ft. | 1,800 sq. ft. |
| BTU Range | 18,000-35,000 | 25,000-37,000 |
| Burn Time | ||
| Efficiency | 72-83% | 99% |
| Emission |
Features
Certified room heater with double heat exchange system
Increased stove efficiency; less heat lost up the chimney results in more usable heat for less money.
Millivolt ignition system
Stove can operate without electricity; excellent source of heat during power outages
Wall thermostat
Thermostat turns stove on and off; maintain the home at preset comfort level; desired heat is maintained automatically. Optional programmable thermostat is also available.
Three-way on/off/thermostat switch
Allows you to flip the stove on for instantaneous fire, or to control the stove from the wall thermostat, or to turn it off.
Adjustable heat output
All the pleasure of fire-reviewing ambiance, even when little room heat is desired.
DIRECT VENT MODEL
Sealed firebox/Direct-Vent technology
Air for combustion is drawn from outside the home, reducing cold air drafts; greater efficiency due to not using heated room air for combustion.
Through-the-wall venting option
Vent pipe can be installed through an exterior wall with two-foot vertical rise for an unobtrusive look. An inconspicuous terminus on the outside wall completes the installation. No cuts are necessary through your ceiling or roof.
Through-the-roof venting options
Vent pipe can be installed through an interior location with the vent pipe terminating above the roof. The stove may also be installed through an existing fireplace or Class A chimney using available adapters.
Variable speed fan with thermostat (optional)
Heated air is moved throughout the home for more uniform temperature. Thermostat monitors stove body temperatures and automatically controls fan.
VENT-FREE MODEL
No chimney required
99% efficient; no heat loss up a chimney, all the heat goes into the room; lower installation costs.
Oxygen Depletion Sensor
Room oxygen levels are monitored for safe levels.